丁香婷婷综合五月六月-丁香婷婷综合五月综合色啪-丁香五六月婷婷-丁香五婷婷-五月婷婷综合基地-五级黄色片

Home > Product > Tube mill
Tube mill

Description: The mill is cylinder rotating device with girth gear and two chambers. The materials are fed to first chamber through hollow shaft through feeding device. There is stepped liner or waves liners and different size of balls inside this chamber. After finishing in first chamber, the materials will be fed to second chamber. There is flat liners and balls inside second chamber, which will grind the materials once again. After grinding, the powder will be discharged and then finish grinding works.

Equipment

Shell
This ball mill is horizontal shell rotating device, mainly consist of shell, mill door and liner bolts. So we required to check the mill when shut down, especially to check the liners on shell and mill door.
Liner
The liners are used for protect shell in order to avoid damage to shell, please check liners regularly to avoid any loose because of bolts etc.
Diaphragm
Diaphragm is used to separate grinding media to avoid axial movement of media and large size move to next chamber. It can make suitable grinding for materials and control filling grade, material flow, and grinding speed inside mill.
Diaphragm plate is consist of central circle, feed cone, grate plate, lifting plate, liner, diaphragm support and blind plate. Please check if there is any loose, missing of bolts, to check the condition of grate plate and blind plate, if there is any crack or influence to grate plate and check if there is any movement of balls.
Main bearing
Bearing is used to bear the weight of rotated part also impact of grinding media. The mill is supported on main bearing by hollow shaft. There is bearing cover, watch hole, temperature gauge on bearing housing.
Feeding and discharging device
Feeding device is used to feed materials into mill, there is chute feeding device, screw feeding device and ladle feeding device. The discharging device is consist of discharging grate plate, guide cone, lifting plate, discharging cylinder, drive connecting tube,drum screen, discharging cover, coarse tube etc.
Drive device
Drive device is consist of speed motor, slow drive motor, slow reducer and speed reducer. Mainly check: if there is any overheat and noise of reducer oil pump. And check working condition of each elements such as pressure gauge, temperature gauge, and if there is any oil leakage, oil level and oil color of oil tank. Please adjust oil flow as per weather condition; check if there is any noise of main oil pump etc.


Specification (Diameter*Length) Rotating speed(r/min) Feed size(mm) Capacity Load of grinding media (t) Main motor Main Reducer Weight (t)
型號(hào)
Model
Power (kw) Speed
(r.p.m)
Model Speed ratio
Φ2.2×11 22.2 ≤25 15~17 50 JR1512-8 570 740 ZD80 5 83
Φ2.4×8 20.91 ≤25 14~18 39.5-42 JR1512-8 570 740 ZD80 5 76.4
Φ2.4×9 20.91 ≤25 23~25圈 50 JR1512-8 570 740 ZD80 5 81
Φ2.4×10 20.91 ≤25 開16~18 50 TR1512-8 630 740 ZD80 5 92.4
Φ2.4×11 21 ≤25 開17~19
圈20~22
60~62 YR710-8/1180 710 740 JDX630 5.6 105
Φ2.4×12 21 ≤25 開18~20
圈22~24
63~65 YR800-8/1180 800 740 MBY710 6.3 110
Φ2.4×13 21 ≤25 開21~22
圈24~26
66~68 YR800-8/1180 800 740 MBY710 6.3 117
Φ2.6×10 20.6 ≤25 21~24 64 YR800-8/1180 800 740 JDX710 6.3 133
Φ2.6×11 20.6 ≤25 21~28 69 YR800-8/1180 800 740 JDX710 6.3 140
Φ2.6×13 20.6 ≤25 28~31 80 YR1000-8/1180 1000 740 JDX800 6.3 151
Φ3.0×9 19.3 ≤25 35~40(圈) 80~83 YR1000-8/1180 1000 740 MBY800 7.1 137
Φ3×11 18.92 ≤25 44~47(圈) 95~100 YR1250-8/1430 1250 740 JDX900 7.1 159
Φ3×12 18.92 ≤25 48~52(圈) 103 YR1250-8/1430 1250 740 JDX900 7.1 164
Φ3×13 18.92 ≤25 39~45(圈) 110~116 YR1400-8/1430 1400 740 JDX900 7.1 183
Φ3.2×11 18.3 ≤25 45~48(圈) 110~112 YR1400-8/1430 1400 740 JDX900 7.1 195.5
Φ3.2×13 18.7 ≤25 45~50(開) 125 YR1600-8/1430 1600 740 JDX1000 7.15 213
Φ3.4×11 18 ≤25 45~55(圈) 115 YR1600-8/1430 1600 740 JDX1000 7.15 201
Φ3.5×13
中心傳動(dòng)
17 ≤25 50~55 150 YR2000-8/1730 2000 740 JS130-A-F1   223
Φ3.5×13
邊緣傳動(dòng)
17.5 ≤25 50~60 150 YR2000-8/1730 2000 740 JDX1000 6.3 240.5
Φ3.8×13
主軸承式
16.3 ≤25 65~70 185 YR2500-8/1730 2500 740 JS130-C-F1   240
Φ3.8×13
焊接滑履
16.3 ≤25 65~70 185 YR2500-8/1730 2500 740 JS130-C-F1   220
Φ4×13 16.3 ≤25 78~80 191 YRKK900 2800 745 JS140-A   220
Φ4.2×11
Main Bearing
15.6 ≤2 120~140 190 YR2800-8/1730 2800 740 JS140-A-F1D   245
Φ4.2×13
Main Bearing
15.6 ≤2 140~155 225 YRKK1000-8 33500 740 JS150-A   260
Φ4.2×13
Slide Shoe (Center)
15.6 ≤2 140~155 225 YRKK1000-8 3550 740 JS150-A   280
Φ4.2×13
焊接滑履
15.6 ≤2 140~155 225 YRKK1000-8 3550 740 JS150-B   260
Φ4.6×13.5
焊接滑履
14.5 ≤25 140 280 YRKK1000-6 4500 995     365
Φ4.6×14 14.5 ≤25 145 285 YR1000-6 4500 995     372
Φ5.0×15 14 ≤25 160~165 350 YRKK1000-8 6000 740     420

Ohter Products
Tube mill
Tube mill --Dry raw mill
Cement Mill
Ball mill|PMG series high efficient ball mill
dia.2.6*13m Super fine slag mill
dia. 3.2*13m Slag mill
dia. 3.5*10m raw mill
dia. 3.8*(7.5+1.5)mRaw mill
dia. 4.2*13m Center driving Cement mill
dia. 4.2*13m Cement mill
Φ4.2×13m Cement mill ( Single edge double driving )
diameter 4.2*14.5m cement mill
dia.4.2*15m cement mill
M42130 Cement mill Technical performance
dia. 4.6*(10+3.5)m Middle discharging raw mill
dia.4.4*13.5m cement mill
Technical performance of φ4.6×14.5m cement mill
dia. 4.6*15.5m cement mill
PRM Type Vertical Roller Pressure Mill
φ3.2×13m cement mill(side drive)technical parameter
 Print [ close ] Top
Copyright © Jiangsu Pengfei Group Co.,Ltd. All Rights Reserved.
主站蜘蛛池模板: 在线视频区| 免费一级肉体全黄毛片| 欧美精品一级| 456主播喷水在线观看| 2017天天爽夜夜爽精品视频| 国产欧美曰韩一区二区三区| 美女张腿男人桶免费视频| 久久伊人成人网| 日本在线观看不卡免费视频| 拍真实国产伦偷精品| 中国日本高清免费视频网| 日韩精品在线一区| 亚洲一区在线播放| 亚洲精品91香蕉综合区| 2020精品极品国产色在线观看 | 作爱视频在线免费观看| 中文字幕成人免费视频| 亚洲视频在线免费观看| 亚洲国产精品一区二区三区| 色吊丝在线观看国产| 男人天堂男人天堂| 日韩国产在线观看| 久久久欧美综合久久久久| 欧美亚洲免费| 精品亚洲成a人在线观看| 久久精品国产屋| 国产精品久久久久影视不卡| 国产视频二| 成人一级视频| 中文字幕日韩精品亚洲七区 | 久久久久综合国产| 国产三级国产精品国产普男人| 国产精品成人一区二区三区| 成年人黄页| a成人在线| 亚洲毛片一级巨乳| 亚洲人的天堂男人爽爽爽| 欧美成人全部视频| 欧美大尺度免费一级特黄| 国产一级片播放| 成年女人免费毛片视频永久|